The hole through the frame and the grip safety is fine, as it works with the old safety. I used a Muescheke on my kimber and I am never sure about the spelling unless I look it up in the Brownells wish book. Thanks again for the help it is much appreciated. The gun could Definatly use a good trigger job but it still isn't bad at all how it is. My left thumb works the safety and the trigger finger works the slide release. Not only do your personal wants and needs come into play, but so do the other factors that play a role in making your final decision. The left side just needed more taken off of the sear engagement area, it was just hard to tell.
It would also be wise for you to investigate further into a couple of safeties that pique your interests. Some 1911 enthusiasts are huge fans of the Ed Brown brand. They are probably your best bet. This is designed for all 1911s and is made from high-quality steel. Our first safety is the 1911 Extended Ambidextrous Thumb Safety from Wilson Combat. Try to assemble thumb safety on frame without the grip safety.
Bottom Line The Sig is a good ambi-safety to have if you're on a budget, but don't want to deal with the hassle of having it professionally installed. It sounds very hard to do. Place the right side of the thumb safety on first. In my eyes, the kimber sized levers are too big for a compact but others may be okay with them. This tells me that it may be binding when the groove in the pin meets the cutout in the safety. I believe the Olympic Arms also made them for a short time. It is recommended that you review each one carefully as you consider some of the additional factors that will be part of your final decision.
I have read blindhogg over and over, and and I jsut finished up reading Roderus Custom. While Kimber calls the place where this was done as their Custom Shop, it is easy to see it was actually done in their Crappy Shop. Haven't had a chance to shoot after cleaning it all out. I'm a carpenter and most tools are designed for right handed people. It does what it supposed to do, and do that well. I posted on another site first and it became sig bashing! Unlock additional features, and fewer ads while browsing.
If it doesn't go in easily, it means the sear is out of alignment. I have never seen that before, lol if you ever upload a video on youtube please let me know. I used this when I bought my first 1911 and found it helpful. The other three are now sporting Wilson Combat ambi's. But the reviews say you don't need one.
This has a generous, elegantly-contoured shape with a that provides support that is easy to reach for shooters who use a high-thumb hold. Can also be installed as an upgrade part on Government Model, Commander, and clones. Thanks in advance for the input! Check out those links and see if it helps. Even some factory-made 1911 safeties will benefit the right-handed shooter and leave the left-handed shooter out to dry. That being said I am thinking about adding a ambi-safety to my Stainless Kimber 1911. You should take the time to consider each aspect and how it will benefit you personally. Alternatively, you can have it professionally installed by a gunsmith.
It comes in stainless steel or blue-colored finish. Sometimes, it may need to be sanded so it can fit perfectly. Should I take it straight to a gunsmith and not think twice about it? I have never installed a part on any firearm that has not just dropped right in. My buddy's Springfield gi was a breeze compared to this thing but the whole gun in general seems a lot smoother and tighter than his gi was out of the box. Both are equal in engagement.
For one, this is probably one of the toughest safeties on the market. Come for the info, stay and make some friends. They are quite rare, and if you find one it will put a very large dent in your pocketbook. Consider the aspects above, along with your personal needs as you shop for a product that's right for you. Then partially place the mainspring housing back on.
Use your plastic hammer to make sure the safety is on tight. The finish will ensure that the safety is resistant to damage or scratches. Here are some aspects that past buyers have considered before making a decision: Are You Right-Handed Or Left-Handed? Instead of the end of a screwdriver, I use a rubber tipped hammer. With a little practice it's easy to do. . Having an ambidextrous safety is worth the upgrade and for good reason. Your going to have to remove the main spring housing and main spring, and may have to remove the beavertail to check function and adjust as needed.