The problem is, the iPod has been a phenomenon for 2-3 years now and apparently Subaru thinks its fine to continue shipping custom, closed units without an aux patch capability or line in. Or, read on for more information about how I modified my car. I am thinking of trying a different stereo shop. Only one problem: I've never seen one work very well. I then soldered on either side of this connection to put it through the audio connector. Pictures and operational characteristics are below: There is a small toggle switch, easily in drivers-reach behind the ignition, but out of view the steering wheel hides it. So it seems to me that there should really be a simpler solution.
There are plenty of options for connecting an iPod to a car stereo--increasingly, car makers themselves are offering full iPod control as an. I'm using the same Radio Shack jack. It looks very clean this way. Day Description Motors Monday All Motors, All day Track Day Tuesday Like To Race? Just use HiFi sources, not distorted crap. I would not be running the two at once obviously, but I am not sure if this setup is fundamentally wrong.
All i have access to is the underside of the board where the through hold pins are available, but no board traces. And if anyone from Subaru is listening, shame…shame…shame for shipping such a closed system in this day of open systems. The first iPhone, for example, was released that January, and New Horizons passed Jupiter later on that year. It's high quality, so we feel it's well worth the Money. I did it on my aftermarket Alpine face by hooking up a switch to it. I took the dissaaembeled radio in to him.
You'll be happy with the new driving experience. It's an iSimple unit, and one similar to it can be found pretty cheap. Absolutely love the new power the chip gives. It seems because Im using wire from old keyboard - there is 4 wires in one shield. Check out the DashLinQ Android Car Mode App available at It becomes easy and safe to use your phone while driving for music, phone calls and navigation.
No 20-pin expansion bus socket. Just got back from my road trip and it worked great, the only problem was a bit of a high pitched whine as mentioned in the comments above when either the Zune or iPhone was plugged into the 12v inverter. Be extremely gentle and use a low heat solder to attach these two wires. If you live in an urban area with lots of radio stations and telephone lines, you'll get interference, fade-outs, and random bursts of static. I use it to drill through roughly half the thickness of the plastic a little at a time with lots of testing.
If nothing is in the jack, it is connected as a passthrough to the inputs pins 3 and 4, respectively. Once he identified the radio module, he was able to locate the left an right input pins through trial and error. I did a similar project on a blaupunkt head unit in my old car. So after soldering for connections and some hot glue , we have the ability to intercept the signal. See link below for picture and prices. The initial steps of disassembly: the front after removing the controls, the reverse of the control unit, a top-down view after removing the top of the unit. The radio module connects to the motherboard with a 36-pin connector.
He did a fantastic job on mine. I have been very pleased with my purchasing experience and you have been a tremendous help. You'll need or make a similar mod to your i88 harness to supply those signals. This weekend, I'm going back to the drawing board and trying what : an. I used a tiny flat screwdriver and pried on them carefully, and eventually they snap loose from the board. We also offer 30-days money back quaratee if the adapter is not compatible.
They said the install was pretty difficult given the way Subaru manufactured the car. If an audio connector is plugged in, input redirects to the jack. I would guess that clipping the power pin to the tuner I have no idea where this is would shut down the whole thing. It offers 2 rca jacks. Thought that was a little funny, was expecting a garbled mix. Pin 31 is the right audio channel and pin 32 is left audio channel.
I noticed there was an empty spot in the top left of the unit which looked like it would fit the panel mount audio jack. I am happy with both esthetically and performance wise. All wiring done as instructed but seems like I've got an incomplete stereo seperation between Left and Right channels. It cost me about 300 bucks in the end. This hack was performed on a 2004 Honda Accord and will be the same for 2003, 2004, 2005, 2006, 2007 Accords. He had a few options for rectifying the situation.