Determine which fuse may be causing the problem. If the light comes on again when the vehicle is started after adjusting tire inflation pressure to the specified level, have the system checked at your Lexus dealer. Use the window lock switch to prevent them from making unexpected use of the switches. Tune in the desired station. Ask your Lexus dealer for details.
D Do not exceed 75 kg 165 lb. . Do not rely excessively on dynamic laser cruise control. To maintain the air conditioning efficiency, inspect and replace the air conditioning filter according to the maintenance schedule. To use the auxiliary box, open it as shown above. If the indicator light does not If the light comes on while driving, the vehicle stability control come on when the ignition is turned on, contact your Lexus system and traction control system do not work. If this occurs, have your vehicle checked by your Lexus dealer.
Use bulbs with the generated and may cause severe injury by electric bulb numbers and wattage ratings given in the table. To reactivate the automatic retract function, push the knobs again to return them to the active position. Pull the passenger side wiper arm upward. Push and pull the child restraint system in different directions to be sure it is secure. If system control master warning malfunctions, contact light Lexus dealer. Apply the parking brake firmly.
Push the switch mode changes as in the following. Adjust tire inflation Replace bulb. You can change the initial setting. Driving even a short distance can damage a tire and wheel beyond repair. Low tire pressure warning light.
Some examples are shown in the illustration. Please contact your Lexus dealer for further details. Inspect the filter on the surface. Other conditions continue to be adjusted automatically. Ask your Lexus dealer for details. Remove the key plate from the key case.
Widen the gap between the seat cushion and seatback anchored. D Do not drive with the head restraints removed. Headlight dimmer and turn signal switch. D Avoid overfilling, or the engine could be damaged. The seat belts provide maximum protection when the passengers are sitting up straight and well back in the seats.
Before jump starting or checking the power steering fluid, etc. For vehicle speed reduction, see page 414. Do not use the seat until the seat belt is fixed, because it cannot protect an adult occupant or your child from injury. It also includes the weight of any special equipment installed on your vehicle. The indicator light in the instrument cluster Setting at a desired speed. If recharging with the battery installed on the vehicle, be Type B — sure to disconnect the ground cable. On inclines, declines or winding roads, etc.
When testing the hood, also check that the system is activated when the battery terminal is disconnected and then reconnected. When the instrument panel lights are turned on, the brightness of the display will be reduced. These reflected signals can may notice fading and drifting, which increase with the distance interfere with those received directly from the radio station, from the radio transmitter. With some headphone generally available in the market, it may be difficult to catch sound properly. However, please contact your Lexus dealer. Use the anchor brackets on the back of the rear seatback to attach the top strap. The fog lights come on only when the headlights are on low beam.
If an impact results in a forward airbag and inflator deceleration beyond the designed threshold level, the system Front passenger occupant classification system triggers the airbag inflators. Although there is no problem to continue driving normally, have the electronically modulated air suspension checked by your Lexus dealer as soon as possible. When boosting, use the battery of matching or higher quality. Run the lap and shoulder belt Same position Same angle through or around the booster seat and child following the instructions provided by its manufacturer and insert the tab into D When installing a child restraint system in the rear the buckle taking care not to twist the belt. To return to its original volume, push the same button again.